Time domain

Timedomain data is displayed in two location. First, there are all overall values that can trigger an alert. These are shown in the main dashboard of the Machine overview. In the Machine overview navigate to Timedomain as shown below.

Figure 1: Timedomain overview

The Timedomain overview shows all overall values sent by the connected device that can trigger an alert. The horizontal axis shows the times at which the values were measured. There can be multiple vertical axes, relating to the different units of the overall values. To set the time

The overall value names can be clicked to toggle their graphs on and off. In the figure below, only the maximum temperature is visible. Multiple devices can be selected by clicking the list icon on the right.

To access all available overall values, click the Timedomain icon on the right of the overview pane.

Figure 3: Show all timedomain data

This will lead to the Timedomain dashboard as shown in the figure below. The dashboard has 4 main sections.

1. Devices: Select devices here to show their overall values. Multiple devices can be selected. Devices can be viewed in the list, or searched for using the search bar in the top of the pane.

2. Timedomain: Toggle the graphs of all available overall values by clicking their name or the colored rectangle next to their name.

3. Timedomain display: This display shows all graphs of the selected overall values.

4. Category select: Toggle full categories of the overall values. By selecting the Min option, all overall values that show the minimal value will be toggled. The same goes for Max and Avg.

Figure 4: Timedomain dashboard

Click the Realtime to specify the time range from which to show the overall values.

figure 5: Choose time range for timedomain data

This will open the options screen as shown below. Specify what data to show using:

1. Last: Specify how far back historic data should be specified. Defaults to 7 days, but can be increased up to 30 days. Use the advanced option to specify how many days, hours, minutes and seconds exactly.

2. Interval: Specify the interval of time from which data should be shown, i.e. current day or current hour.

3. Data aggregation function: Aggregate data over the Grouping interval and specify how to handle the result. Of the aggregated data the minimum, maximum, average, sum and count can be shown. Choose None to disable the data aggregation function.

4. Timezone: Specify the timezone to base the options upon.

figure 6: Specify time range for time domain data